See uartlog.zig attached inside this docx which if unpacked contains uartLog.py PS: Know I read that openHAB's Zigbee developer recommended hardware flow control for commercial use for added stability, however then we are talking about Zigbee Coordinators and Zigbee devices, not about dedicated stand-alone Zigbee routers.įYI, several Home Assistant community members have tested Sonoff provided uartLog.py script which seems to confirm "Auto BSL" is working(?), so maybe possible to enter bootloader without need to open enclosure to manually press BTL button: Regardless, note that Hardware Flow Control should only be of interest for a Zigbee Coordinator and not for a Zigbee Router. Hardware flow control should in theory make for more stable serial communication since the flow control is off-loaded from the application and the system CPU to the MCU, but not sure if it will be more stable in the real world for Zigbee2MQTT. # Optional: RTS / CTS Hardware Flow Control for serial port (default: false) If so then just need to do so before enabling hardware flow control in the software application like Zigbee2MQTT or? I understand switching to hardware flow control mode on this ITead Sonoff Zigbee 3.0 USB Dongle Plus adapter is done via the dip-switch on the board, so not by using a different firmware (like more usual) or do you need new firmware built for it too? ![]() I wish we had firmware with hardware flow control active.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |